%
% File CS_and_DH.tex
%
% Contact: apksh@uohyd.ernet.in (ambapradeep@gmail.com)
%%
%% Based on the style files for WSC_Skt_and_IT_World_2015, which were, in turn,
%% Based on the style files for COLING2014, which were, in turn,
%% Based on the style files for ACL-2014, which were, in turn,
%% Based on the style files for ACL-2013, which were, in turn,
%% Based on the style files for ACL-2012, which were, in turn,
%% based on the style files for ACL-2011, which were, in turn, 
%% based on the style files for ACL-2010, which were, in turn, 
%% based on the style files for ACL-IJCNLP-2009, which were, in turn,
%% based on the style files for EACL-2009 and IJCNLP-2008...

%% Based on the style files for EACL 2006 by 
%%e.agirre@ehu.es or Sergi.Balari@uab.es
%% and that of ACL 08 by Joakim Nivre and Noah Smith

\documentclass[11pt]{article}
\usepackage{scl}
\usepackage{times}
\usepackage{url}
\usepackage{latexsym}
\usepackage{lineno}


%% Stuff to use devanagari script within this document.
%% You can use any Devanagari Unicode/UTF-8 font for Devanagari texts. 
%% For that replace the font name `Sanskrit 2003' with your font name in below line `\newfontfamily\skt[Script=Devanagari]{Sanskrit 2003}'.
%% For example,  if you are using `Mangal' unicode font then your line should be
%% `\newfontfamily\skt[Script=Devanagari]{Mangal}' 
%% To give your text(s) into Devanagari 
%% mark your Devanagari text  with '\skt' tag, such as \skt{परिचयः}. Se
%% See the below examples in devanagari.
%% while using devanagari script, compile your latex code with `xelatex' command instead of pdflatex/latex. 

\usepackage{fontspec, xunicode, xltxtra}
\newfontfamily\skt[Script=Devanagari]{Sanskrit 2003}


%\setlength\titlebox{5cm}

% You can expand the titlebox if you need extra space
% to show all the authors. Please do not make the titlebox
% smaller than 5cm (the original size); we will check this
% in the camera-ready version and ask you to change it back.


\title{Instructions for the Submissions to \\Computational Sanskrit and Digital Humanities: WSC18}

\author{First Author \\
  Affiliation / Address line 1 \\
  Affiliation / Address line 2 \\
  Affiliation / Address line 3 \\
  {\tt email@domain} \\\And
  Second Author \\
  Affiliation / Address line 1 \\
  Affiliation / Address line 2 \\
  Affiliation / Address line 3 \\
  {\tt email@domain} 
\\}

\date{}

\begin{document}
\maketitle
%\linenumbers
\begin{abstract}
  This document contains the instructions for preparing a
  manuscript for submissions to  the section \textbf{Computational Sanskrit and Digital Humanities: WSC18}. 
  The document itself
  conforms to its own specifications, and is therefore an example of
  what your manuscript should look like. These instructions should be
  used for both manuscripts submitted for review and for final versions of
  accepted papers.  Authors are asked to conform to all the directions
  reported in this document.
\end{abstract}

\section{Introduction}
\label{intro}

%
% The following footnote without marker is needed for the camera-ready
% version of the paper.
% 
%\blfootnote{
    %
    % for review submission
    %
%}

The following instructions are directed to authors of papers submitted
to WSC18 under {\bf Computational Sanskrit and Digital Humanities} section.  All
authors are required to adhere to these specifications. Authors are
required to provide a Portable Document Format (PDF) version of their
papers. \textbf{The proceedings are designed for printing on A4
  paper.}

\section{General Instructions}

Manuscripts must be in single-column format.
The title, authors' names and complete
addresses
must be centred at the top of the first page, and
any full-width figures or tables (see the guidelines in
Subsection~\ref{ssec:first}). {\bf Type single-spaced.}  Start all
pages directly under the top margin. See the guidelines later
regarding formatting the first page.  
Do not number the pages.

\subsection{Electronically-available resources}

We strongly prefer that you prepare your PDF files using \LaTeX{} with
the official scl.sty style file (scl.sty) and bibliography style
(acl.bst). These files are available at
% Please change the url to reflect the official WSC weblink
\url{https://wsc.ubcsanskrit.ca/section-19/}.
You will also find the document
you are currently reading (CS\_and\_DH.pdf) and its \LaTeX{} source code
(CS\_and\_DH.tex) on this website.

\subsection{Format of Electronic Manuscript}
\label{sect:pdf}

For the production of the electronic manuscript you must use Adobe's
Portable Document Format (PDF). PDF files are usually produced from
\LaTeX{} using the \textit{pdflatex} command. If your version of
\LaTeX{} produces Postscript files, you can convert these into PDF
using \textit{ps2pdf} or \textit{dvipdf}.\\

It is of utmost importance to specify the \textbf{A4 format} (21 cm
x 29.7 cm) when formatting the paper. When working with
{\tt dvips}, for instance, one should specify {\tt -t a4}.\\

%If you cannot meet the above requirements for the
%production of your electronic submission, please contact the
%Amba Kulkarni (ambapradeep@gmail.com) as soon as possible.

\subsection{Layout}
\label{ssec:layout}

Format manuscripts with a single column to a page, in the manner these
instructions are formatted with A4 size.

%\begin{itemize}
%\item Left and right margins: 2.5 cm
%\item Top margin: 2.5 cm
%\item Bottom margin: 2.5 cm
%\item Width: 16.0 cm
%\item Height: 24.7 cm
%\end{itemize}

%\noindent Papers should not be submitted on any other paper size.

\subsection{Fonts}
For reasons of uniformity, Adobe's {\bf Times Roman} font should be
used. In \LaTeX2e{} this is accomplished by putting 

\begin{quote}
\begin{verbatim}
\usepackage{times}
\usepackage{latexsym}
\end{verbatim}
\end{quote}
in the preamble. If Times Roman is unavailable, use {\bf Computer
  Modern Roman} (\LaTeX2e{}'s default).  Note that the latter is about
  10\% less dense than Adobe's Times Roman font.

\subsection{Devanagari support}
For Devanagari support, we recommend you use the following packages: \\
fontspec,xunicode and xltxtra. \\

\textbackslash usepackage\{fontspec, xunicode, xltxtra\}\\

Specify the Devanagri font, for example Sanskrit 2003, as below.\\

\textbackslash newfontfamily\textbackslash skt[Script=Devanagari]\{Sanskrit 2003\}\\ \\

We recommend {\bf Sanskrit 2003} for uniformity. However, in case you have a special requirement for any other font, you may use it by specifying it as above.\\

Use of {\it newfontfamily\textbackslash skt} allows you to type your Sanskrit text directly in UTF.\\

Here is an example with Devanagari text in tex.\\
\{\textbackslash skt {\skt अधः श्लोकः एवं प्रस्तूयते -}\}\\
\textbackslash begin\{verse\}\\
\{\textbackslash skt {\skt वागर्थाविव संपृक्तौ वागर्थप्रतिपत्तये।}\}\\
\{\textbackslash skt {\skt जगत: पितरौ वन्दे पार्वतीपरमेश्वरौ ।।}\}\\
\textbackslash end\{verse\}\\\\

After compilation the pdf looks like:- \\

{\skt अधः श्लोकः एवं प्रस्तूयते -}
\begin{verse}
{\skt वागर्थाविव संपृक्तौ वागर्थप्रतिपत्तये।}\\
{\skt जगत: पितरौ वन्दे पार्वतीपरमेश्वरौ ।।}
\end{verse}

Compile Latex files having Devanagari texts with {\bf xelatex} instead of pdflatex.

\subsection{The First Page}
\label{ssec:first}


{\bf Title}: Place the title centred at the top of the first page.
Long titles should be typed on two lines without a blank line intervening,
followed by the
author's names(s), and the affiliation on the following line. 
Do not use footnotes for affiliations. \\

Do not
use only initials for given names (middle initials are allowed). Do
not format surnames in all capitals (e.g., use ``Schlangen'' not
``SCHLANGEN'').  \\

Do not format title and section headings in all
capitals as well except for proper names (such as ``BLEU'') that are
conventionally in all capitals.  \\

The affiliation should contain the
author's complete address, and if possible, an electronic mail
address. \\

{\bf Abstract}: Type the abstract between addresses and main body.\\

{\bf Text}: Begin typing the main body of the text immediately after
the abstract. Do not include page numbers.\\

Subsequent paragraphs are {\bf indented}.

\subsection{Sections}

{\bf Headings}: Type and label section and subsection headings in the
style shown on the present document.  Use numbered sections (Arabic
numerals) in order to facilitate cross references. Number subsections
with the section number and the subsection number separated by a dot,
in Arabic numerals. Do not number subsubsections.\\

{\bf Citations}: Citations within the text appear in parentheses
as~\cite{zen2}. If the author's name appears in the text as sentence constituent, cite as Huet~\shortcite{zen2}.\\

Append lowercase letters to the year in cases of ambiguity. \\

Treat double authors as in~\cite{scharf-hyman09}, but write as in~\cite{platform12} when more than two authors are involved. \\

Collapse multiple citations as in~\cite{zen2,platform12}. 
\\

You can use the command \verb|\newcite| to get ``author (year)'' citations.\\

\textbf{References}: Gather the full set of references together under
the heading {\bf References}; place the section before any Appendices,
unless they contain references. Arrange the references alphabetically
by first author, rather than by order of occurrence in the text.
Provide as complete a citation as possible, using a consistent format.\\

%The \LaTeX{} and Bib\TeX{} style files provided roughly fit the
%American Psychological Association format, allowing regular citations, 
%short citations and multiple citations as described above.\\

{\bf Appendices}: Appendices, if any, directly follow the text and the
references (but see above).  Letter them in sequence and provide an
informative title: {\bf Appendix A. Title of Appendix}.

\subsection{Footnotes}

{\bf Footnotes}: Put footnotes at the bottom of the page.
They may be numbered or referred to by asterisks or other
symbols.\footnote{This is how a footnote should appear.} 

\subsection{Graphics}

{\bf Illustrations}: Place figures, tables, and photographs in the
paper near where they are first discussed, rather than at the end, if
possible. 
Colour illustrations are discouraged, unless you have verified that  
they will be understandable when printed in black ink.\\

{\bf Captions}: Provide a caption for every illustration; number each one
sequentially in the form:  ``Figure 1. Caption of the Figure.'',  ``Table 1'', etc.\\

%Narrow graphics together with the single-column format may lead to
%large empty spaces.

%If you have multiple graphics with related content, it may be
%preferable to combine them in one graphic.
%You can identify the sub-graphics with sub-captions below the
%sub-graphics numbered (a), (b), (c) etc.\ and using 9 pt text.
%The \LaTeX{} packages wrapfig, subfig, subtable and/or subcaption
%may be useful.

\section*{Acknowledgements}

The acknowledgements should go immediately before the references.  Do
not number the acknowledgements section.

% include your own bib file like this:
\bibliographystyle{acl}
\bibliography{scl}
\end{document}
